21 teeth
(should be same as below)(this line goes away)
| B7D 17322-C = Driven Gear - Speedometer 21 teeth | |
| |
| Year(s) | 1963 |
| Application | (1963 except 1-ton payload) 4.57:1 rear axle ratio. 7x13, 7x14 tires, 3-speed manual transmission, used with B7C 17285-A Drive Gear |
| Part Number (should be same as below)(this line goes away) | B7D 17322-C |
| Ford Part Number | B7D 17322-C |
| Section | 172 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | |
| This Part Goes with these Other Parts | 7A039, 17298, 17260, 17292, 17262 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | most of the Driven Gears have part number 17271. |
| Source of Information | |
| extra notes | |
| database ID | 5086 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1962 | Transmission and Extension (Ford 2.93 side-cover) - 144/170 engine | |
| 1963-1967 | 3-Speed Ford 3.03 Synchro. Transmission | |
| 1963-1964 | 4-Speed Dagenham Transmission - 144, 170 engine | |
| 1963-1964 | Gear Shift Column - Remote Control - Dagenham 4-Speed |
Thanks for the positive comments that have been left on this site. It is still a work in progress.