| C1UU 17271-A = Driven Gear - Speedometer 17 teeth, 12 ridges on the cable end | |
 | |
| Year(s) | 1961-1964 |
| Application | (1961-1962) - 3.50 rear axle ratio. 6.50x13, 7x13 tires, 3-speed manual transmission, used with C0DR 17285-A Drive Gear (1963 before serial #430,001, not used on 1-ton payload) - 3.50 rear axle ratio. 6.50x13, 7x13 tires, 3-speed manual transmission, used with B7C 17285-A Drive Gear (1963 before serial #430,001) - 3.50 rear axle ratio. 7x14 tires, 3-speed manual transmission, used with B7C 17285-A Drive Gear (1964) - 3.50 rear axle ratio. 6.50x13, 7x13, 7x14 tires, 4-speed manual transmission, used with C3UZ 17285-A Drive Gear |
| Part Number (should be same as below)(this line goes away) | C1UU 17271-A |
| Ford Part Number | C1UU 17271-A |
| Section | 172 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | C3DZ 17271-B |
| This Part Replaces | |
| This Part Goes with these Other Parts | 7A039, 17298, 17260, 17292, 17262 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | |
| Source of Information | |
| extra notes | |
| database ID | 5057 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1962 | Transmission and Extension (Ford 2.93 side-cover) - 144/170 engine | |
| 1963-1967 | 3-Speed Ford 3.03 Synchro. Transmission | |
| 1963-1964 | 4-Speed Dagenham Transmission - 144, 170 engine | |
| 1963-1964 | Gear Shift Column - Remote Control - Dagenham 4-Speed |
Thanks for the positive comments that have been left on this site. It is still a work in progress.