A=2.87", B=1.12", C=2.68", D=1.683", F=1", G=2.222", H=1.362", J=1.002". K=0.9358", M=23 splines
(should be same as below)(this line goes away)
| C1UW 4851-A = Flange - Universal Joint - Axle End A=2.87", B=1.12", C=2.68", D=1.683", F=1", G=2.222", H=1.362", J=1.002". K=0.9358", M=23 splines | |
| |
| Year(s) | 1961-1962 |
| Application | |
| Part Number (should be same as below)(this line goes away) | C1UW 4851-A |
| Ford Part Number | C1UW 4851-A |
| Section | 41 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | C2DZ 4851-A |
| This Part Replaces | |
| This Part Goes with these Other Parts | 4859, 4676, 4209, 351521, 371518-S, 356504, 351126 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | |
| Source of Information | |
| extra notes | |
| database ID | 910 |
| Years | Drawing Name | Description |
|---|---|---|
| 1963 | Drive Shaft and Related Parts | |
| 1961-1967 | 7.25"-gear Rear Axle - 2300 lb | |
| 1961-1963 | 7.25" Integral Carrier Rear Axle | |
| 1964-1967 | Drive Shaft - Manual Transmission | |
| 1964-1967 | Drive Shaft - Automatic Transmission |
Thanks for the positive comments that have been left on this site. It is still a work in progress.