The year(s) listed is based on data from many publications and may not include all appropriate years.
| Part Number | Years | Part Name | Description | Application |
|---|---|---|---|---|
| 20348-S2 | 1961-1967 | Bolt - Housing Cover | 3/8"-16, 3/4" long, hexagon-head, full-diameter-body bolt | WCC 7-1/4" rear axle |
| 20522-S8 | 1961-1967 | Bolt - Bearing Cap | 3/8"-16, 2" long, hexagon head, full diameter body, bolt | WCC 7-1/4" rear axle |
| 34445-S7-8 | 1961-1967 | Locknut - Brake Backing Plate to Axle - Rear Axle Housing to Wheel Bearing Retainer | 3/8"-24, 9/16" wide, 13/32" thick, torque-type lock nut | |
| 34806-S7 | 1961-1967 | Lockwasher - Differential Adjuster Lock | 5/16" bolt size, 19/32" O.D., 5/64" thick, medium lock washer | WCC 7-1/4" rear axle |
| 34807-S7-8 | 1961-1967 | Lockwasher - Bearing Cap (Retainer) | 3/8" bolt size, 11/16" O.D., 3/32" thick, medium lock washer | WCC 7-1/4" rear axle |
| 34807-S7-8 | 1961-1967 | Lockwasher - Housing Cover | 3/8" bolt size, 11/16" O.D., 3/32" thick, medium lock washer | WCC 7-1/4" rear axle |
| 350211-S | 1961-1967 | Screw - Differential Adjuster Lock | 5/16"-18, 7/16" long, 11/32" thread length, self-locking, hexagon-head, bolt | WCC 7-1/4" rear axle |
| 351521-S | 1961-1967 | Washer - Rear Axle U-joint Flange | 3/4" bolt size, 25/32" I.D., 1-3/16" O.D., 5/32" thick, flat washer | WCC 7-1/4" rear axle |
| 353909-S8 | 1961-1967 | Pin - Pinion Shaft | 3/16" diameter, 1-1/2" long, spring pin | WCC 7-1/4" rear axle |
| 371518-S | 1961-1967 | Nut - Rear Axle Flange to Pinion | 3/4"-20, 1-1/16" width, 19/32" thick, locking nut with 3 notches | WCC, WCR, WDF rear axles |
| 372768-S | 1961-1967 | Screw - Differential Gear to Case Assembly Locking | 3/8"-24, 3/4" long, 1/2" thread length, self-locking, slotted-hexagon-head bolt | WCC 7-1/4" rear axle |
| 374055-S | 1961-1963 | Bolt - Brake Carrier - Rear Brake Backing Plate to Axle | 3/8"-24, 1-3/16" long, ?? Bolt | WCC 7-1/4" rear axle |
| 87675-S | 1961-1967 | Plug - Rear Axle Filler | 1/2"-14 pipe thread, 5/8" thread length, pipe plug | WCR rear axle (1961-1962) WCC rear axle |
| A8AZ 1001A- | 1961-1967 | Gasket - Rear Wheel Bearing Retainer - Outer | ??? | WCC, WCR, WDF rear axles |
| C1AZ 1001A- | 1961-1967 | Gasket - Rear Brake Carrier Plate - Rear Wheel Backing Plate | 2-7/8" I.D., 4 holes | WCC, WCR, WDF rear axles |
| C6VY 1001A- | 1964-1967 | Gasket - Rear Wheel Bearing Retainer or Rear Axle Shaft - Rear Brake Backing Plate | 3-7/32" I.D., four holes | |
| A8AZ 1001B- | 1961-1964 | Gasket - Rear Wheel Bearing Retainer | 3-7/32" I.D., 5 holes | WCC |
| A9A 1107-A | 1961 | Bolt - Front and Rear Axle Hub/Lug | 1/2"-20, 1-3/8" long | |
| C1AZ 1107-A | 1961-1967 | Bolt - Front and Rear Axle Hub/Lug | 1/2"-20, 1-15/32" long, serration diameter 0.656" | |
| C1UW 1177-A | 1961-1967 | Seal Assembly - Rear Wheel Bearing Oil - Inner | 1-3/8" I.D., 2-3/32" O.D. | 7-1/4" rear axle |
| B9AW 1180-A | 1961-1965 | Retainer - Rear Wheel Bearing - Inner | 1-3/8" I.D. | WCC, WCR, WDF rear axles |
| B9AZ 1180-A | 1966-1967 | Retainer - Rear Wheel Bearing - Inner | 1-3/8" I.D., 2" O.D. | WCC, WCR, WDF rear axles |
| B7A 1225-A | 1961-1962 | Bearing Assembly - Rear Wheel, Inner Ball | 1-3/8" I.D., 2-13/16" O.D. | |
| B7AZ 1225-A | 1961-1967 | Bearing Assembly - Rear Wheel, Inner Ball | 1-3/8" I.D., 2-53/64" O.D. includes retainer |
WCC, WCR, WDF rear axles |
| D0AZ 1225-A | 1961-1967 | Bearing Assembly - Rear Wheel, Inner Ball | 1-3/8" I.D., 2-53/64" O.D. (medium size) | 7-1/4" axle, WCC-M, N 9" axle, WCR-M, N, R, |
| D0DZ 1225-A | 1961-1967 | Bearing Assembly - Rear Wheel, Inner | 1-21/64"I.D., 2-43/64"O.D. (small size) | (1961-1964) WCC-A, C, D, E (1964-1967) WDF axle (1963-1965) WCR-A, B, D, E, F, G, H, J, K, L |
| C1TZ 4010-A | 1961-1962 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear |
| C2UZ 4010-A | 1961-1963 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear, before Ser. 380,001 |
| C1TZ 4010-B | 1961-1962 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear |
| C3UZ 4010-C | 1963-1965 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear, from Ser. 380,001 |
| C3UZ 4010-E | 1963-1966 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear from Ser. 380,001 to 774,001 |
| C3UZ 4010-G | 1966-1967 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear from Ser. 774,001 |
| C0AW 4020-A | 1961-1962 | Retainer - Rear Wheel Bearing - Outer | ??? | WCC |
| C0AW 4020-B | 1961-1967 | Retainer - Rear Wheel Bearing - Outer | ??? | WCC, WCR |
| C2OZ 4022-A | 1962-1967 | Vent Assembly - Rear Brake Line Connection and Axle | 7/16"-20, 2-1/8" long ?? | WCC |
| D1OZ 4022-A | 1962-1967 | Vent Assembly - Rear Brake Line Connection and Axle | 7/16"-20, 2-1/8" long ?? | WCC |
| C0TT 4022-A | 1961- | Vent Assembly - Rear Brake Line Connection and Axle | 1/8" pipe thread | |
| C1DW 4033-A | 1961-1967 | Cover - Rear Axle Housing | ??? | WCC |
| C1DW 4036-A | 1961-1962 | Gasket - Cover to Housing | ??? | WCC |
| C1DZ 4036-A | 1961-1967 | Gasket - Cover to Housing | ??? | WCC |
| C0DZ 4067-A | 1961-1967 | Adjuster Nut - Differential Bearing | ??? | WCC |
| C0DW 4067-B | 1961-1967 | Adjuster Nut - Differential Bearing | ??? | WCC |
| ???? 4A050-? | 1962-1967 | Scoop - Differential Carrier Oil | ??? | |
| D0ZZ 4143-A | 1961-1967 | Lock - Differential Adjuster | ??? | WCC |
| C0DW 4143-B | 1961-1967 | Lock - Differential Adjuster | ??? | WCC |
| C2AZ 4204-B | 1964-1965 | Case Assembly - Differential Gear | includes (2) C2OW 4228-A Washers | 4.57:1 ratio From Ser. 460,001 to 660,001 |
| C1DW 4204-B | 1961-1967 | Case Assembly - Differential Gear | ??? | except 4.57:1 ratio |
| C2AZ 4204-H | 1965-1967 | Case Assembly - Differential Gear | includes (2) C2OW 4228-A Washers | 4.57:1 ratio From Ser. 660,001 |
| C2TZ 4209-A | 1962-1966 |
Gear and Pinion - Driving - Matched Set Kit, Differential Gear, Driving Pinion and Shims |
7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle |
| C1DZ 4209-AC | 1964 | Gear & Pinion Kit w/Shims | 7" ring gear, 3.50 ratio, 35&10 teeth | 144 engine, WCC axle |
| C1UZ 4209-B | 1961-1964 | Kit - Differential Gear and Driving Pinion - Matched Set | 7" ring gear, 4.00 ratio, 36&9 teeth includes shims |
WCC axle |
| C2TZ 4209-D | 1962-1967 |
Gear and Pinion - Driving - Matched Set Kit, Differential Gear, Driving Pinion and Shims |
7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle |
| C1UZ 4209-D | 1961-1964 | Gear & Pinion Kit w/Shims | 7" ring gear, 4.00 ratio, 36&9 teeth | 144 engine, WCC axle |
| C1UZ 4209-E | 1961-1964 | Gear & Pinion Kit w/Shims | 7" ring gear, 4.00 ratio, 36&9 teeth | 144 engine, WCC-C axle |
| C1DZ 4209-G | 1961 |
Gear and Pinion - Driving - Matched Set Kit - Differential Gear, Driving Pinion and Shims |
7" ring gear, 4.00 ratio | 144 engine, WCC axle |
| C1DZ 4209-G | 1962-1967 |
Gear and Pinion - Driving - Matched Set Kit - Differential Gear, Driving Pinion and Shims |
7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle |
| C2TZ 4209-G | 1962-1967 | Gear and Pinion - Driving - Matched Set | 7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle |
| C1DZ 4209-M | 1961-1964 | Kit - Differential Gear and Driving Pinion - Matched Set | 7" ring gear, 3.50 ratio, 35&10 teeth includes shims |
144 engine, WCC axle |
| C1DZ 4209-R | 1961-1967 | Gear & Pinion Kit w/Shims | 7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle |
| C1DZ 4209-U | 1961-1964 | Gear & Pinion Kit w/Shims | 7" ring gear, 3.50 ratio, 35&10 teeth | 144 engine, WCC-A axle |
| C1DZ 4209-Z | 1961-1967 | Gear & Pinion Kit w/Shims | 7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle |
| C0DZ 4211-A | 1961-1967 | Differential Pinion Shaft Kit - Rear Axle | includes:
|
WCC conventional differential |
| C1DZ 4211-A | 1961-1967 | Differential Pinion Shaft Kit - Rear Axle | includes:
|
WCC rear axle with 4-pinion differential |
| C0DW 4211-C | 1961-1967 | Spider Assembly - Differential Pinion Shaft | ??? | WCC conventional differential |
| C0DW 4215-C | 1961-1967 | Pinion - Rear Axle Differential | ??? | |
| C0DZ 4215-C | 1961-1967 | Differential Shaft Pinion Kit - Rear Axle | includes:
|
|
| C1UW 4221-A | 1961-1967 | Cone & Roller Assembly - Differential Bearing | 1-1/2" I.D. (small size) | |
| C1UW 4222-A | 1961-1967 | Cup - Differential Bearing | 2-9/16" O.D. (small size) | |
| C0DW 4228-A | 1961-1967 | Washer - Differential Side Gear Thrust | 1.39" I.D., 2.24"O.D., 0.03" thick washer | |
| C0DW 4230-C | 1961-1967 | Washer - Pinion Shaft Thrust | 0.655"I.D., 1.28"O.D., black washer | |
| C1TZ 4234-A | 1967 | Shaft and Bearing - R.H. Axle | A=32-1/16" long B=1-1/16" diameter C=6-1/8" hub width D=4-1/2" lug circle diameter 24 splines 5 lug holes |
|
| C1UW 4234-A | 1961-1966 | Shaft and Bearing - R.H. Axle | A= 32-1/16" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes |
|
| C1TZ 4234-B | 1967 | Shaft and Bearing - L.H. Axle | A= 28-35/64" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes |
|
| C1UW 4235-A | 1961-1962 | Shaft and Bearing - L.H. Axle | ??? | |
| C1UZ 4235-A | 1961-1966 | Shaft and Bearing - L.H. Axle | A= 28-35/64" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes |
|
| C1UZ 4235-B | 1967 | Shaft and Bearing - L.H. Axle | ??? | |
| C1DW 4236-A | 1961-1967 | Gear - Differential Side | ??? | |
| C0DW 4616-A | 1961-1967 | Cup - Driving Pinion Bearing - Front | ??? | fpr 7" ring gear?? |
| TBAA 4616-A | 1961-1967 | Cup - Driving Pinion Bearing - Rear | ??? | 7-1/4" ring gear |
| C0DW 4621-A | 1961-1967 | Cone & Roller Assembly - Driving Pinion Bearing - Front | ??? | |
| C0DW 4628-A | 1961-1967 | Cup - Driving Pinion Bearing - Rear | ??? | 7" ring gear |
| C0DW 4630-A | 1961-1967 | Cone & Roller Assembly - Driving Pinion Bearing - Rear | ??? | 7" ring gear |
| C1DZ 4630-A | 1961-1967 | Cone & Roller Assembly - Driving Pinion Bearing - Rear | ??? | 7-1/4" ring gear |
| C3DZ 4662-A | 1961-1967 | Spacer - Driving Pinion Bearing | ??? | 7" ring gear |
| C3DZ 4662-B | 1961-1967 | Spacer - Driving Pinion Bearing | ??? | 7-1/4" ring gear |
| C1DW 4662-C | 1961-1962 | Spacer - Driving Pinion Bearing | ??? | |
| C1UW 4676-B | 1961-1962 | Seal Assembly - Drive Pinion Oil/Grease | 1-5/8" I.D., 2-5/8"O.D., 1/2" thick | |
| C1UZ 4676-B | 1961-1967 | Seal Assembly - Drive Pinion Oil/Grease | 1-5/8" I.D., 2-5/8"O.D., 1/2" thick | Before Ser. A84,001 |
| C1UZ 4676-C | 1967 | Seal Assembly - Drive Pinion Oil/Grease | 2-5/8"O.D., 0.455" thick, to seal 1-21/32" shaft | From Ser. A84,001 |
| C2DZ 4851-A | 1961-1967 | Flange - Universal Joint - Axle End | includes 4859 | |
| C1UW 4851-A | 1961-1962 | Flange - Universal Joint - Axle End | A=2.87", B=1.12", C=2.68", D=1.683", F=1", G=2.222", H=1.362", J=1.002". K=0.9358", M=23 splines | |
| ???? 4859-? | 1961-1967 | Deflector - U-Joint Flange Oil Seal Dust | ??? |
Thanks for the positive comments that have been left on this site. It is still a work in progress.