3/4"-20, 1-1/16" width, 19/32" thick, locking nut with 3 notches
(should be same as below)(this line goes away)
| 371518-S = Nut - Rear Axle Flange to Pinion 3/4"-20, 1-1/16" width, 19/32" thick, locking nut with 3 notches | |
| Hardware Finish: S = Plain | |
| |
| Year(s) | 1961-1967 |
| Application | WCC, WCR, WDF rear axles |
| Part Number (should be same as below)(this line goes away) | 371518-S (MM-180) |
| Ford Part Number | 371518-S |
| Section | 40 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | |
| This Part Goes with these Other Parts | (4851), C1UW 4851-A, C2DZ 4851-A, 351588, 351521 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | |
| Source of Information | |
| extra notes | |
| database ID | 8770 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1967 | 7.25"-gear Rear Axle - 2300 lb | |
| 1964-1967 | 9" Rear Axle - 2700, 3050 lb (1-ton payload) | |
| 1961-1963 | 7.25" Integral Carrier Rear Axle |
Thanks for the positive comments that have been left on this site. It is still a work in progress.