1/2"-20, 3/4" wide, 7/16" thick, slotted nut
(should be same as below)(this line goes away)
| 351059-S = Nut - Front Wheel Spindle Connecting (Tie) Rod End (Ball Stud) 1/2"-20, 3/4" wide, 7/16" thick, slotted nut | |
| |
| Year(s) | 1961-1967 |
| Application | |
| Part Number (should be same as below)(this line goes away) | 351059-S (MM-66) |
| Ford Part Number | 351059-S |
| Section | 30 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 2 |
| Part was Replaced By | |
| This Part Replaces | |
| This Part Goes with these Other Parts | C1TT 3290-C, 3A131, 72035-S7-8 |
| This Part is Part of this Larger Assembly | C1UZ 3A130-A, C4UZ 3A130-A, C4UZ 3A131-A |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | Timken N-58 |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | part of the C4UZ 3A130-A End Kit R.H. - Front Wheel Spindle Connecting (Tie) Rod and C4UZ 3A131-A End Kit R.H. - Front Wheel Spindle Connecting (Tie) Rod and C1UZ 3A131-A End Kit L.H. - Front Wheel Spindle Connecting Rod |
| Source of Information | |
| extra notes | |
| database ID | 8418 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1963 | Front Axle and Linkage (1900, 2050, 2150 lb capacity) (shows 1961-1963 king pins) | |
| 1964-1967 | Tie rod # C4UZ 3280-A |
Thanks for the positive comments that have been left on this site. It is still a work in progress.