Home Page    ::     Enter Vehicle Data    ::     See All Vehicle Data

Front Axle and Linkage (1900, 2050, 2150 lb capacity) (shows 1961-1963 king pins)

For 1961-1963 Econolines

exploded drawing


Notes

The year(s) listed is based on data from many publications and may not include all appropriate years.


Parts related to this Drawing

Part Number Years Part Name Description Application
20507-S8 1961-1967 Bolt - Tie Rod (Spindle Connecting Rod) Clamp 3/8"-24, 1-3/4" long, hexagon head, full-diameter body, bolt
33799-S7 1961-1967 Nut - Arm Stop, Turn Adjustment - Spindle Arm 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut
34445-S7-8 1961-1967 Locknut - Tie Rod (Spindle Connecting Rod)Clamp 3/8"-24, 9/16" wide, 13/32" thick, torque-type lock nut
34447-S2 1961-1967 Locknut - Brake Backing Plate to Spindle 7/16"-20, 5/8" wide, 29/64" thick, torque-type lock nut
34453-S8 1961-1967 Locknut - Steering Gear Selector Shaft (Pitman) Arm Clamp 5/8"-18, 15/16" wide, 47/64" thick, torque type, lock nut
34833-S 1961-1967 Locking Washer - Spindle Arm to Spindle 3/4" spring light washer
351059-S 1961-1967 Nut - Steering Drag Link (Link to Sector Shaft Arm) 1/2"-20, 3/4" wide, 7/16" thick, slotted (castle) nut
351059-S 1961-1967 Nut - Front Wheel Spindle Connecting (Tie) Rod End (Ball Stud) 1/2"-20, 3/4" wide, 7/16" thick, slotted nut
351125-S 1961-1967 Nut - Spindle Arm to Spindle 3/4"-16, 1-1/8" wide, 13/16" thick, grade 5, castle nut
352655-S8 1961-1967 Locking Pin - Spindle Bolt 7/16" diameter, 1-7/16" long, groove pin
353101-S8 1961-1967 Bolt - Brake Backing Plate to Spindle 7/16"-20, 1-1/16" long, 13/16" thread length, hexagon-head bolt
353395-S8 1961-1967 Bolt - Steering Gear Sector Shaft (Pitman) Arm Clamp 5/8"-18, 2-13/16" long, 1-5/32" thread length, hexagon-head bolt
354573-S 1961-1967 Nut - Front Axle Spindle 3/4"-16, 1-1/16" width, 37/64", thick, hexagon castle nut
45302-S 1961 Nut - Spindle Arm to Spindle 3/4"-16, ??" wide, ??" thick, castle nut
72035-S7-8 1961-1963 Cotter Pin- Front Wheel Spindle Connecting Rod 1/8" diameter, 1" long, cotter pin
72035-S7-8 1961-1967 Cotter Pin - Steering Drag Link (Link to Sector Shaft Arm) 1/8" diameter, 1" long, cotter pin
72054-S 1961-1967 Pin - Spindle Arm to Spindle 5/32" diameter, 1-1/4" long, cotter pin
72054-S 1961-1967 Pin - Front Axle Spindle Nut 5/32" diameter, 1-1/4" long, cotter pin
87901-S8 1963-1967 Fitting - Drag Link Lubricator 1/8"-27 pipe thread, 3/4" long, 3/16" thread length, straight lubricator fitting
87907-S8 1961-1967 Fitting - Tie Rod (Spindle Connecting Rod)Lubricator 1/4"-28 pipe thread, 1/2" long, 7/64" thread length, straight lubricator fitting
87907-S8 1961-1963 Fitting - Axle Spindle Lubricator 1/4"-28 pipe thread, 1/2" long, 7/64" thread length, straight lubricator fitting
91229-S 1961-1967 Screw - Arm Stop, Turn Adjustment - Spindle Arm 3/8"-16, 1-1/4" (1"?) long, oval-point, square-head, screw
C??? 3010?- 1962 Axle - Front axle capacity 2,050 lbs
C??? 3010?- 1963 Axle - Front axle capacity 2,150 lbs
C1UU 3010A- 1961-1962 Axle - Front axle capacity 1,900 lbs
Spindle Bolt Centers: A= 53.06"
Spring Seat Centers: B= 35.76"
Spindle Bolt I.D.: C= 0.743"
Spring Cip: D= 2.80"
Spring Clip: E= 2.50"
Spindle Centerline to Pad: F= 2.50"
Spindle Bolt Inclination: G= 7°35' - 7°25'
C5UZ 3010A- 1963-1967 Axle - Front Axle Capacity 2,150 lbs.
A= 53.06" Spindle Bolt Center
B= 35.76" Spring Seat Centers
C= 0.74" Spindle Bolt I.D.
D= 2.80" Spring Clip
E= 2.50" Spring Clip
F= 2.50" Spindle Centerline to Pad
G= 7#176;35' to 7#176;25' Spindle Bolt Inclination
C2UZ 3020A- 1962-1967 Bumper - Front Axle ??? from serial #240,001
C1UU 3105-A 1961-1963 Spindle Assembly - Front Axle R.H. R.H.
Inner bearing diameter = 1.75"
Outer bearing diameter = 0.75"
Bolt hole diameter = 0.74"
side tapped for 1/4"-28 grease fitting
C4UZ 3105-A 1964-1967 Spindle Assembly - R.H. - Front Axle R.H., 2150 lb axle
Inner bearing diameter = 1.75"
Outer bearing diameter = 0.75"
Bolt hole diameter = 0.74"
tapped on top and bottom for C4UZ 3125-A 5/16"-16 Plug
C1UU 3106-A 1961-1963 Spindle Assembly - Front Axle L.H. L.H.
Inner bearing diameter = 1.75"
Outer bearing diameter = 0.75"
Bolt hole diameter = 0.74"
side tapped for 1/4"-28 grease fitting
C4UZ 3106-A 1964-1967 Spindle Assembly - L.H. - Front Axle L.H., 2150 lb axle
Inner bearing diameter = 1.75"
Outer bearing diameter = 0.75"
Bolt hole diameter = 0.74"
tapped on top and bottom for C4UZ 3125-A 5/16"-16 Plug
C1UU 3110-A 1961-1963 Bushing - Spindle Bolt (King Pin) 1-1/4" long
C4UA 3110-B 1964-1967 Bushing - Spindle Bolt (King Pin) 1-1/16" long
C1UZ 3111-A 1961-1962 Spindle Bolt (King Pin) Set/Kit - Front Axle standard diameter
consists of:
  • 4) C1UU 3110-A Bushing (steel and bronze)
  • 2) C1UU 3115-A Spindle Bolt (King Pin)
  • 2) C1UU 3123-B or C1UU 3123-C Bearing
  • 4) C1UU 3125-A Seal
  • 2) 352655-S8 Locking Pin
C4UZ 3111-B 1964-1967 Spindle Bolt (King Pin) Set/Kit - Front Axle standard diameter for 2150 lb front axle
includes:
  • 4) C4UA 3110-B bushing
  • 2) C4UA 3115-A spindle bolt
  • 2) C4UA 3123-A bearing
  • 4) C4UZ 3125-A plug
  • 4) 87924-S fitting
  • 2) 352655-S (NN-72) locking pin
C1UZ 3111-C 1961-1963 Spindle Bolt (King Pin) Set/Kit - Front Axle standard diameter for 1900, 2050, 2150 lb front axle
consists of:
  • 4) C1UU 3110-A Bushing (steel and bronze)
  • 2) C1UU 3115-A Spindle Bolt
  • 2) C4UA 3123-A Bearing
  • 4) C1UU 3125-A Seal
  • 2) 352655-S Locking Pin
C1UZ 3111-D 1961-1963 Spindle Bolt (King Pin) Set/Kit (oversize)- Front Axle 0.010" Oversize Bolt diameter for 1900, 2050, 2150 lb front axle
consists of:
  • 4) C6TA 3110-F Bushing (steel and bronze)
  • 2) C6TA 3115-B Spindle Bolt
  • 2) C6TA 3123-B Bearing
  • 4) B7C 3125-A Seal
  • 2) 352655-S Locking Pin
  • 2) 358080-S Plug
C4UA 3115-A 1964-1967 Bolt - Front Axle Spindle (King Pin) 4.91" long, 0.74" O.D.
C1UU 3115-A 1961-1963 Bolt - Front Axle Spindle (King Pin) 6.20" long, 0.74" O.D.
C4UA 3123-A 1961-1967 Bearing - Spindle Bolt (King Pin) standard size, 3/4" I.D., 1-5/8" O.D.
C6TA 3123-B 1961-1963 Bearing - Spindle Bolt (King Pin) 0.010" Oversize, 0.76" I.D., 1-5/8" O.D. use with oversize Spindle Bolts
C1UU 3123-B 1961 Bearing Assembly - Spindle Bolt (King Pin) standard size, 3/4" I.D., 1-5/8" O.D.
C1UU 3123-C 1962 Bearing Assembly - Spindle Bolt (King Pin) standard size, 3/4" I.D., 1-5/8" O.D.
B7C 3125-A 1961-1963 Seal - Spindle Bolt Dust 0.44" I.D. use with oversize Spindle Bolts
C1UU 3125-A 1961-1963 Seal/Washer - Spindle Bolt Dust 13/32" (0.40") I.D.
C4UZ 3125-A 1964-1967 Seal - Spindle Bolt Dust threaded resin plug
C1UU 3130-A 1961-1967 Arm - R.H. Spindle/Steering R.H.
C1UU 3131-A 1961-1964 Arm - L.H. Spindle/Steering L.H.
boss is not tapped for adjusting screw		 before serial #490,001
C1UZ 3131-A 1964-1967 Arm - Front Axle L.H. Spindle/Steering L.H.
boss is tapped for adjusting screw		 from serial #490,001
C1UZ 3A130-A 1961-1963 End Assembly - Front Wheel Spindle Connecting (Tie) Rod R.H. R.H. - 1/2"-20 nut thread, 11/16"-18 tube thread
includes:
  • (1) 351059-S Nut
  • (1) 72035-S7-8 Cotter Pin
C4UZ 3A130-A 1964-1967 End Kit - Front Wheel Spindle Connecting (Tie) Rod R.H. R.H.
includes:
  • (1) C4UA 3289-A R.H. Tie Rod End
  • (1) 351059-S Nut
C1UZ 3A131-A 1961-1963 End Assembly Kit - Front Wheel Spindle Connecting (Tie) Rod L.H. L.H. - Nut Thread 1/2"-20, Tube Thread 11/16"-18
includes:
  • 1) C1TT 3290-C OR C1UU 3290-A rod end
  • 1) 72035-S7-8 cotter pin
  • 1) 351059-S nut
C4UZ 3A131-A 1964-1967 End Kit - Front Wheel Spindle Connecting (Tie) Rod L.H. L.H.
includes:
  • 1) C4UA 3290-A L.H. Tie Rod End
  • 1) 351059-S nut
C4UZ 3280-A 1964-1967 Rod - Tie (Spindle Connecting) tube length = 48.00", 11/16"-18 thread
includes:
  • C4UZ 3281-A Tube - Tie Rod
  • C4UZ 3A130-A End Kit - R.H. Tie Rod
  • C4UZ 3A131-A End Kit - L.H. Tie Rod
2150 lb axle
C1UU 3280-B 1961-1963 Rod Assembly - Spindle Connecting (Tie) with clamps and ends, 49.58" tube length 1900, 2050, 2150 lb axles
C1UZ 3281-A 1961-1963 Tube Assembly - Tie Rod (Spindle Connecting Rod) (Tie Rod Adjust Sleeve) with clamps, 49.58" tube length, 11/16"-18 thread size
C4UZ 3281-A 1964-1967 Tube Assembly - Tie Rod (Spindle Connecting Rod) (Tie Rod Adjust Sleeve) with clamps, 11/16"-18 thread size
B4C 3287-A 1961-1963 Clamp - Tie Rod (Spindle Connecting Rod) ???
C1TT 3287-B 1964-1967 Clamp - Tie Rod (Spindle Connecting Rod) includes clamp, bolt, lockwasher, and nut
C1UU 3304-A 1961 Link Assembly - Steering Drag (Drag Link) ???
C4UZ 3304-A 1964-1967 Link Assembly - Steering Drag (Drag Link) stud & stud type
28-1/2" long
C1UU 3304-B 1962-1963 Link Assembly - Steering Drag (Drag Link) stud & stud type
length 28-1/2"
Kit included (2) B7C 3332-A Seal
C1UZ 3310-A 1961-1962 Kit - Steering Drag Link Adjusting Sleeve consists of:
  • (1) C1UU 3283-A Tube
  • (2) B4C 3287-A Clamp
  • (2) 20507-S8 Bolt
  • (2) 34445-S8 Nut
B7C 3332-A 1961-1963 Seal - Drag Link End and Spindle Connecting (Tie) Rod End ???
C4UZ 3332-A 1964-1967 Seal - Tie Rod End 0.50" high
C4UZ 3332-B 1964-1967 Seal - Drag Link End 0.84" high
C1UZ 3590-A 1961-1967 Arm - Steering Gear Sector Shaft (Pitman) socket type
C1UU 3590-B 1961-1962 Arm - Steering Gear Sector Shaft (Pitman) ???


\"Add Please leave comments about this website:

Thanks for the positive comments that have been left on this site. It is still a work in progress.