A= 28-35/64" long
B= 1-1/16" diameter
C= 6-1/8" hub width
D= 4-1/2" lug circle diameter
24 splines
5 stud holes
(should be same as below)(this line goes away)
| C1TZ 4234-B = Shaft and Bearing - L.H. Axle A= 28-35/64" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes | |
| |
| Year(s) | 1967 |
| Application | |
| Part Number (should be same as below)(this line goes away) | C1TZ 4234-B |
| Ford Part Number | C1TZ 4234-B |
| Section | 41 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | C1UZ 4235-B |
| This Part Goes with these Other Parts | 4010, 1001, 374055, 34445, 1107 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | normally the L.H. axle shaft is 4235, but for Econolines, both R.H. and L.H. axle shafts for 7.25" rear axle are 4234. |
| Source of Information | |
| extra notes | |
| database ID | 793 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1967 | 7.25"-gear Rear Axle - 2300 lb | |
| 1961-1963 | 7.25" Integral Carrier Rear Axle | |
| 1961-1967 | Rear Suspension - drums, backing plate, brake hose, shaft and bearing, housing |
Thanks for the positive comments that have been left on this site. It is still a work in progress.