5/8"-18, 15/16" wide, 47/64" thick, torque type, lock nut
(should be same as below)(this line goes away)
| 34453-S8 = Locknut - Steering Gear Selector Shaft (Pitman) Arm Clamp 5/8"-18, 15/16" wide, 47/64" thick, torque type, lock nut | |
| Hardware Finish: S8 = Zinc Plate | |
| |
| Year(s) | 1961-1967 |
| Application | |
| Part Number (should be same as below)(this line goes away) | 34453-S8 (M-89) |
| Ford Part Number | 34453-S8 |
| Section | 30 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | |
| This Part Goes with these Other Parts | 3590 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | incorrectly listed as 34449-S7-8 |
| Source of Information | |
| extra notes | |
| database ID | 7659 |
| Years | Drawing Name | Description |
|---|---|---|
| 1961-1967 | Steering Column, Gear and Wheel (shows 1961-19xx column to dash bracket) | |
| 1961-1963 | Front Axle and Linkage (1900, 2050, 2150 lb capacity) (shows 1961-1963 king pins) |
Thanks for the positive comments that have been left on this site. It is still a work in progress.