3/4"-16, 1-1/8" wide, 9/16" thick, locking nut
(should be same as below)(this line goes away)
| 351126-S = Nut - Universal Joint - Axle End Flange 3/4"-16, 1-1/8" wide, 9/16" thick, locking nut | |
| Hardware Finish: S = Plain | |
| |
| Year(s) | 1963-1967 |
| Application | both rear axles? |
| Part Number (should be same as below)(this line goes away) | 351126-S (MM-145) |
| Ford Part Number | 351126-S |
| Section | 46 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | |
| This Part Goes with these Other Parts | 356504, 4851 |
| This Part is Part of this Larger Assembly | |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | Spicer 30185 |
| Material | |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | |
| Source of Information | |
| extra notes | |
| database ID | 9302 |
| Years | Drawing Name | Description |
|---|---|---|
| 1964-1967 | Drive Shaft - Manual Transmission | |
| 1964-1967 | Drive Shaft - Automatic Transmission |
Thanks for the positive comments that have been left on this site. It is still a work in progress.