1/4"-18 pipe thread, 9/16" thread length, pipe plug
used to plug hole when not used with emission reduction
(should be same as below)(this line goes away)
can be substituted for 87658-S
| 87651-S = Plug - Exhaust/Intake Manifold Vacuum Hole 1/4"-18 pipe thread, 9/16" thread length, pipe plug | |
| |
| Year(s) | 1961-1962 |
| Application | 144, 170 engine used to plug hole when not used with emission reduction |
| Part Number (should be same as below)(this line goes away) | 87651-S (P-12-A) |
| Ford Part Number | 87651-S |
| Section | 61 |
| Identification (printed on part) | |
| Color | |
| Quantity per Vehicle | 1 |
| Part was Replaced By | |
| This Part Replaces | 374259-S |
| This Part Goes with these Other Parts | C2GZ 9430-A |
| This Part is Part of this Larger Assembly | C2DZ 9A589-A |
| Instruction Sheet Number | |
| Autolite/Motorcraft Number | |
| Aftermarket Part | |
| Material | steel |
| Opposite (left-right) Part | |
| Part used in other Fords | |
| Notes | part of the C1DZ 9A589-A Spacer Kit - Carburetor to Intake Manifold can be substituted for 87658-S |
| Source of Information | |
| extra notes | |
| database ID | 8334 |
Thanks for the positive comments that have been left on this site. It is still a work in progress.