The year(s) listed is based on data from many publications and may not include all appropriate years.
| Part Number | Years | Part Name | Description | Application |
|---|---|---|---|---|
| 20326-S7 | 1961-1967 | Bolt - Camshaft Thrust Plate to Cylinder Block | 5/16"-18, 5/8" long, hexagon head, full diameter body, bolt | 144, 170 engine |
| 34806-S7 | 1961-1967 | Lockwasher - Camshaft Thrust Plate to Cylinder Block | 5/16" bolt size, 19/32" O.D., 5/64" thick, medium lock washer | 144, 170, 240 engine |
| 371643-S | 1961-1967 | Bolt - Sprocket to Camshaft | 7/16"-14 form thread, 1-1/8" long, 1-1/16" thread length, hexagon-head bolt | 144, 170 engine |
| 373118-S | 1961-1967 | Pin - Sprocket to Camshaft - Dowel | 1/4" diameter, 5/16" (0.31") long, dowel pin | 144, 170 engine |
| C0DE 6250-B | 1961-1964 | Camshaft Assembly - Less Gear | 7/16"-14, 59/64" long tap at front end. 14 teeth on distributor drive gerar 26.14" long (4) 1.8095 - 1.8105" bearing journals |
144, 170 engine |
| C0DZ 6250-B | 1965-1967 | Camshaft Assembly - Less Gear | #GABC, 14-tooth distributor gear | 170 engine |
| C0DE 6256-A | 1961-1967 | Sprocket - Camshaft | 38 teeth | 144, 170 engine |
| C0DE 6261-B | 1961-1963 | Bearing - Camshaft Front | standard O.D., standard size I.D. 0.0823" - 0.0833" wall thickness |
144, 170 engine |
| C9DZ 6261-B | 1964-1967 | Bearing - Camshaft Front | standard size | 144, 170 engine |
| C0DE 6261-C | 1961-1963 | Bearing - Camshaft Front | standard O.D., 0.015" undersize I.D. 0.0898" - 0.0908" wall thickness |
144, 170 engine |
| C9DZ 6261-C | 1961-1967 | Bearing - Camshaft Front | 0.015" undersize | 144, 170 engine |
| C0DE 6263-B | 1961-1967 | Bearing - Camshaft Rear | standard size I.D. and O.D. 0.0598" - 0.0608" wall thickness |
144, 170 engine |
| C0DE 6263-C | 1961-1967 | Bearing - Camshaft Rear | standard O.D. 0.015" undersize I.D. 0.0673" - 0.0683" wall thickness |
144, 170 engine |
| C0DE 6265-A | 1961-1962 | Spacer - Camshaft Sprocket | 1.005" - 1.015"" I.D., 1.36" O.D., 0.164" - 0.166" thick | 144, 170 engine |
| C0DZ 6265-A | 1961-1967 | Spacer - Camshaft Sprocket | 1-23/64" O.D., 1" I.D., 11/64" thick | 144, 170 engine |
| 7HA 6266-A | 1961-1967 | Plug - Cup Shaped - Camshaft Rear Bearing | 2.072" (2.069" - 2.074") O.D. cup-shaped, freeze plug | 144, 170 engine |
| 7HA 6266-B | 1961-1967 | Plug - Cup Shaped - Camshaft Rear Bearing | 2.154" (2.151" - 2.156") I.D. cup-shaped, freeze plug | 144, 170 engine |
| C0DE 6267-B | 1961-1967 | Bearing - Camshaft Front Intermediate | standard size O.D. and I.D. 0.0748" - 0.0758" wall thickness |
144, 170 engine |
| C0DE 6267-C | 1961-1967 | Bearing - Camshaft Front Intermediate | standard O.D., 0.015" undersize I.D. 0.0823" - 0.0833" wall thickness |
144, 170 engine |
| C0DE 6268-A | 1961-1967 | Chain - Timing | 50 links, 49/64" wide | 144, 170 engine |
| C0DE 6269-A | 1961-1967 | Plate - Camshaft Thrust | two 11/32" bolt/stud holes, one 1.43" diameter center hole, 3.52" overall length, 0.160 (0.159" - 0.161") thick | 144, 170 engine |
| C0DE 6270-B | 1961-1967 | Bearing - Camshaft Rear-Intermediate | standard size O.D. and I.D. 0.0673" - 0.0683" wall thickness |
144, 170 engine |
| C0DE 6270-C | 1961-1967 | Bearing - Camshaft Rear-Intermediate | standard O.D., 0.015" undersize I.D. 0.0748" - 0.0758" wall thickness |
144, 170 engine |
| C3AZ 6278-A | 1963-1967 | Washer - Camshaft Sprocket | 1.26" O.D., 0.46" I.D., 0.25" thick | 144, 170, 240 engines |
| EAA 6278-B | 1961-1962 | Washer - Camshaft Sprocket | 1.26" (1.239" - 1.281") O.D., 0.46" (0.449" - 0.471") I.D., 0.25" (0.213" - 0.235") thick | 144, 170 engine |
Thanks for the positive comments that have been left on this site. It is still a work in progress.