The year(s) listed is based on data from many publications and may not include all appropriate years.
| Part Number | Years | Part Name | Description | Application |
|---|---|---|---|---|
| 33795-S7 | 1961 | Nut - Front Turn Indicator Lamp Body to Front Fender | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | optional ICC lights, (Outboard Type) before serial #210,001 |
| 33795-S7 | 1961-1962 | Nut - Alternator Wiring through R.H. Air Side-Deflector Instrument Panel to Dash Panel Wiring through Dash Grommet Retainer to L.H. Side Engine Cover Panel | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | 144 engine |
| 33795-S7 | 1961-1964 | Nut - Generator Regulator Mounting Bracket to Frame | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | 144, 170 engine |
| 33795-S7 | 1961-1964 | Nut - Heater Hose to Body Clamp | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S40 | 1961-1967 | Nut - Front Reflector | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Starter Motor Relay/Solenoid Switch to Frame | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | all |
| 33795-S7 | 1961-1967 | Nut - Ground and Starter Relay Cable through Engine Cover L.H. Side Panel | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Speedometer Cable to Transmission | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Windshield Wiper Motor to Dash Panel | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Windshield Wiper Pivot Shaft Mounting Bracket Through Wiper Motor Mounting Bracket to Motor | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Front Door Ventilating Window Glass Run Lower - Inner Bracket | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1961-1967 | Nut - Front Door Ventilating Window Division Bar | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1962 | Nut - Air Cleaner Bracket to Air Cleaner | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1963-1967 | Nut - Air Conditioner Evaporator Case to Mounting Bracket | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33795-S7 | 1963-1967 | Nut - Air Conditioner Condenser Case to Mounting Bracket | 1/4"-20, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S8 | 1961-1962 | Nut - Field Terminal ?? | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S7 | 1961-1962 | Nut - Horn to Bracket | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S7 | 1961-1964 | Nut - Generator Rear End Plate Terminal Screw | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | generator catalog #30, 36 |
| 33796-S7 | 1961-1967 | Nut - Rear License Plate Lamp to Lamp Bracket | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | (1961-1964) van (1961-1967) pickup |
| 33796-S7 | 1961-1967 | Nut - Accelerator Pedal | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S7 | 1961-1967 | Nut - Accelerator Bellcrank Assembly to Underbody | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | 144, 170 engine |
| 33796-S7 | 1964-1967 | Nut - Ignition Coil Terminal Screw | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S7 | 1964-1967 | Nut - Alternator Terminal Screw | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33796-S7 | 1961-1967 | Nut - Windshield Wiper Pivot Shaft Mounting Bracket Through Wiper Motor Mounting Bracket to Motor | 1/4"-28, 7/16" wide, 7/32" thick, regular hexagon nut | |
| 33797-S8 | 1961-1963 | Nut - Horn Mounting | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S8 | 1961-1966 | Nut - Windshield Washer Nozzle Mounting | 5/16"-18, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33797-S16 | 1961-1967 | Nut - Windshield Washer Jet Assembly | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1961-1967 | Nut - Auxiliary Gas-Fueled Heater spacer insulator | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 89 van/bus |
| 33797-S16 | 1961-1967 | Nut - Windshield Washer Nozzle to Windshield Washer Nozzle to Front Sheet Metal | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S16 | 1961-1967 | Nut - Battery Cable to Battery Terminal Connector | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1963-1967 | Nut - Rear Seat Arm Rest Support Tube - (Attaches to Cushion Frame) | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 89B, C, D, K, L, T from serial #410,001 |
| 33797-S7 | 1963-1967 | Nut - Rear Seat Arm Rest Clamp | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 89B, C, D, K, L, T from serial #410,001 |
| 33797-S7 | 1965 | Nut - Alternator to Voltage Regulator Wiring Clip to Floor Pan | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1965-1967 | Nut - Throttle Cable (near bell crank) Clip | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 240 engine |
| 33797-S7 | 1965-1967 | Nut - Folding/Swivel Passenger Seat Cushion Support | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1965-1967 | Nut - Cowl Wiring and Clip to Engine Cover Mounting Bolts | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1965-1967 | Nut - Throttle Cable to Engine Bracket Clip | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 240 engine |
| 33797-S7 | 1965-1967 | Nut - Throttle Cable (near engine) Clip | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 240 engine |
| 33797-S7 | 1965-1967 | Nut - Transmission Down Shift Control - Outer Lever Assembly | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 240 engine with automatic transmission |
| 33797-S7 | 1965-1967 | Nut - Muffler Outlet Pipe Hanger Bracket to Frame | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1965-1967 | Nut - Exhaust Tail Pipe Rear Hanger Bracket to Frame | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | 89 SuperVan |
| 33797-S7 | 1965-1967 | Nut - Exhaust Tail Pipe Hanger Bracket to Frame | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1961-1964 | Nut - Exhaust Hanger to Body | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33797-S7 | 1963-1967 | Nut - Steering Column to Dashboard Support | 5/16"-18, 1/2" wide, 17/64" thick, grade 5?, regular hexagon nut | |
| 33798-S8 | 1961- | Nut - Rear Spring Tie Bolt | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1962 | Nut - Low and Reverse Shifter Fork Cam and Shaft | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1962 | Nut - Intermediate and High Shift Lever, Low and Reverse Shift Lever | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1963 | Nut - Relay to Starter Cable to Relay | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1964 | Nut - Folding/Swivel Passenger Seat Cushion Support | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1964 | Nut - Cowl Wiring and Clip to Engine Cover Mounting Bolts | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | used with 358350-S Clip |
| 33798-S8 | 1961-1964 | Nut - Body Side and Back Door - Upper/Lower Hinge to Door | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | 89 only |
| 33798-S8 | 1961-1967 | Nut - Front Spring Tie Bolt | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1967 | Nut - Stabilizer Bar Link | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1967 | Nut - Body Side Step Actuating Lever Rod Bracket | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | 89 van/bus |
| 33798-S8 | 1961-1967 | Nut - Body Side Step Actuating Lever Rod | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | 89 van/bus |
| 33798-S8 | 1961-1967 | Nut - Radiator Grille to Lower Panel | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1967 | Nut - Radiator Bracket to Frame | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1967 | Nut - Speedometer Cable to Front Floor Pan | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1961-1967 | Nut - Clutch Release Lever Rod | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1963 | Nut - Generator Wiring and Clip to Engine Cover Mounting Bolt | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | used with 358350-S Clip |
| 33798-S8 | 1963-1967 | Nut - Condenser Mounting Bracket to Roof | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33798-S8 | 1963-1967 | Nut - Universal Joint - U-bolt | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | 2,780 lb, 9" rear axle |
| 33798-S8 | 1965-1967 | Nut - Water Temperature Indicator Sender Wire Extension | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | 170, 240 engine |
| 33798-S8 | 1961-1962 (-1967?) | Nut - Steering Column Tube to Instrument Panel Bracket Clamp | 5/16"-24, 1/2" wide, 17/64" thick, regular hexagon nut | |
| 33799-S7 | 1961-1963 | Nut - Ground Cable to R.H. Frame Side Member | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | |
| 33799-S7 | 1961-1967 | Nut - Arm Stop, Turn Adjustment - Spindle Arm | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | |
| 33799-S7 | 1963-1964 | Nut - Generator Mounting Adjustment Arm | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | with air conditioning |
| 33799-S7 | 1963-1964 | Nut - Generator Mounting Side Bracket | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | with air conditioning |
| 33799-S7 | 1963-1967 | Nut - Air Compresor to Cylinder Block Bracket | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | |
| 33799-S7 | 1964-1967 | Nut - Alternator Mounting Adjustment Arm | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | with air conditioning |
| 33799-S7 | 1965-1967 | Nut - Air Cleaner Support Bracket to Cylinder Block | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | 240 engine |
| 33799-S7 | 1966 | Nut - Exhaust Air Supply Pump Belt Adjustment Arm | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | 170 engine with Thermactor emissions |
| 33799-S7 | 1966 | Nut - Exhaust Air Supply Pump Air Cleaner Outer Bracket | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | 170 engine with Thermactor emissions |
| 33799-S7 | 1966-1967 | Nut - Exhaust Air Supply Pump Belt Adjustment Arm to Pump | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | 240 engine with Thermactor emissions |
| 33799-S7 | 1966-1967 | Nut - Anti-Backfire Valve Bracket to Manifold Stud | 3/8"-16, 9/16" wide, 21/64" thick, grade 5?, regular hexagon nut | 240 engine with thermactor emissions, not intake manifold type |
| 33800-S8 | 1861-1962 | Nut - Steering Column Support Bracket to Instrument Panel | 3/8"-24, 9/16" wide, 21/64" thick, regular hexagon nut | |
| 33800-S8 | 1961-1962 | Nut - - Brake Master Cylinder Assembly to Underbody | 3/8"-24, 9/16" wide, 21/64" thick, regular hexagon nut | |
| 33800-S8 | 1961-1964 | Nut - Steering Column Tube to Instrument Panel Bracket Retainer | 3/8"-24, 9/16" wide, 21/64" thick, regular hexagon nut | |
| 33800-S8 | 1963-1967 | Nut - Shift Lever | 3/8"-24, 9/16" wide, 21/64" thick, regular hexagon nut | |
| 33827-S | 1961-1964 | Nut - Exhaust Manifold to Pipe | 3/8"-16, 9/16" wide, 21/64" thick, regular hexagon nut | 144, 170 engine |
| 33845-S8 | 1965-1967 | Nut - Rear Seat Frame To Floor Retainer | 1/2"-13, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | 89B, C, D, K, L, T |
| 33846-S8 | 1961-1964 | Nut- Rear Seat Frame to Floor Retainer | 1/2"-20, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | 89B, C, D |
| 33846-S8 | 1961-1967 | Nut - Rear Floor Cross - Intermediate Member | 1/2"-20, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | |
| 33846-S8 | 1961-1967 | Nut - Spare Wheel Mounting | 1/2"-20, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | 87, 89? |
| 33846-S8 | 1962-1963 | Nut - Rear Seat Arm Rest Support Tube - Attaches to Floor | 1/2"-20, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | 89B, C, D before serial #410,001 |
| 33846-S8 | 1962-1967 | Nut - Front Turn Indicator Lamp Body, Pad, and Lamp to Front Body Panel | 1/2"-20, 3/4" wide, 7/16" thick, grade 5?, regular hexagon nut | optional ICC outboard lights, from serial #210,001 |
| 33847-S7 | 1961-1967 | Nut - Rear Bumper Outer Arm to Bumper | 9/16"-12, 7/8" wide, 31/64" thick, regular hexagon nut | |
| 33878-S8 | 1961-1962 | Nut - Field Terminal ?? | 1/4"-28, 7/16" wide, 9/32" thick, regular hexagon nut | |
| 34446-S | 1965-1967 | Nut - Motor Mount to Cross Member | 1/2"-13 nut | |
| 34446-S | (1961-1967?) 1963-1967 | Nut - Front Bumper Bracket to Frame | 1/2"-13, 1/2" thick, hexagon nut (staked/crimped to keep tight) | |
| 34670-S7-8 | 1961-1964 | Nut - Generator Mounting to Side Bracket | 7/16"-14, 9/16" wide, 3/8" thick, grade 5, regular hexagon nut | |
| 34670-S7-8 | 1961-1967 | Nut - Rear Bumper Outer Arm to Inner Arm | 7/16"-14, 9/16" wide, 3/8" thick, grade 5, regular hexagon nut | |
| 34670-S7-8 | 1961-1967 | Nut - Rear Floor Cross - Intermediate Member | 7/16"-14, 9/16" wide, 3/8" thick, grade 5, regular hexagon nut | |
| 34670-S7-8 | (1961-1964)1965-1967 | Nut - Carburetor Choke Control to Instrument Panel | 7/16"-14, 9/16" wide, 3/8" thick, grade 5, regular hexagon nut | 170, 240 engine, before serial #B26,001 |
| 34671-S8 | 1961-1967 | Nut - Universal Joint - U-bolt | 7/16"-20, 11/16" wide, 3/8" thick, regular hexagon nut | 7-1/4" rear axle |
| 34671-S8 | 1963-1967 | Nut - Transmission Output (Coupling) Shaft Flange to Yoke | 7/16"-20, 11/16" wide, 3/8" thick, regular hexagon nut | all manual transmission |
| 34672-S | 1961-1967 | Nut - Exhaust Manifold to Muffler Inlet Pipe | 7/16"-14, 11/16" wide, 3/8" thick, brass, regular hexagon nut | 144, 170, 240 engine |
| 34673-S | 1961-1964? | Nut - Exhaust Manifold to Muffler Inlet Pipe | 7/16"-20, 11/16" wide, 3/8" thick, regular hexagon nut | 144, 170 engine |
Thanks for the positive comments that have been left on this site. It is still a work in progress.