The year(s) listed is based on data from many publications and may not include all appropriate years.
| Part Number | Years | Part Name | Description | Application |
|---|---|---|---|---|
| 351256-S7 | 1961-1967 | Washer - Starter Motor Relay Switch Terminal Screw | No. 10 bolt size, 13/64" I.D., 3/8" O.D., 1/32" thick, flat washer | all |
| 351256-S7 | 1965-1967 | Washer - Primary Terminal Wire Through Base | No. 10 bolt size, 13/64" I.D., 3/8" O.D., 1/32" thick, flat washer | |
| 351308-S40 | 1965-1967 | Washer - Front License Plate Mounting Bracket to Impact Bar | 1/4" flat washer, 3.4"? wide, 1/16" thick, flat washer | |
| 351321-S8 | 1961-1967 | Washer - Clutch Pedal to Underbody Bushing | 9/16" bolt size, 37/64" (0.570" - 0.575") I.D., 1-7/16" O.D., 7/64" thick, flat washer | |
| 351362-S2 | 1961-1967 | Washer - Gear Shift Connecting Rod | 5/16" bolt size, 21/64" I.D., 1-1/8" O.D., 1/16" thick, flat washer | (1961-1967) 3-speed transmission (1963-1964) 4-speed transmission |
| 351385-S7 | 1963-1967 | Washer - Driver Folding Seat Back Bracket to Seat Cushion | 3/8" bolt size, 25/64" I.D., 3/4" O.D., 7/64" thick, flat washer | optional folding driver seat |
| 351415-S | 1966 | Washer - Exhaust Air Supply Pump Belt Adjustment Arm | 5/16" bolt size, 3/8" I.D., 7/8" O.D., 3/16" thick, flat washer | 170 engine with Thermactor emissions |
| 351415-S | 1961-1967 | Washer - Carb Vent Tube Bracket to Body ?? | 5/16" bolt size, 3/8" I.D., 7/8" O.D., 3/16" thick, flat washer | |
| 351505-S18 | 1961-1967 | Washer - Bumper to Reinforcement | 5/8" bolt, 21/32" I.D., 1-1/4" O.D., 5/32" thick, flat washer | (1961-1964) 89 van/bus rear bumper (1965-1967) 87 pickup front and rear bumper |
| 351521-S | 1961-1967 | Washer - Rear Axle U-joint Flange | 3/4" bolt size, 25/32" I.D., 1-3/16" O.D., 5/32" thick, flat washer | WCC 7-1/4" rear axle |
| 351588-S | 1963-1967 | Washer - Flange to Pinion | 23/32" bolt, 3/4" I.D., 1-5/16" O.D., 7/32" thick, flat washer | (1963-1967) WCR 9" (1964-1967) WDF 9" locking |
| 351588-S | 1963-1967 | Washer - Output Yoke to Shaft | 23/32" bolt, 3/4" I.D., 1-5/16" O.D., 7/32" thick, flat washer | |
| 351811-S8 | 1961-1967 | Spacer - Transmission Gear Shift Tube Shifter Lever | 3/4" bolt, 49/64" I.D., 1-1/16" O.D., 1/16" thick, flat washer | automatic transmission (only?) |
| 352896-S | 1964-1967 | Washer - Windshield Wiper Motor Output Shaft | 3/8" bolt size, 23/64" I.D., 5/8" O.D., 1/64" thick, flat washer | Ford two-speed wiper motor |
| 352981-S | 1963-1964 | Washer - Generator Mounting Adjustment Arm | 3/8" bolt size, 13/32" I.D., 1" O.D., 1/8" thick, flat washer | |
| 352981-S | 1964-1967 | Washer - Alternator Adjustment Arm | 3/8" bolt size, 13/32" I.D., 1" O.D., 1/8" thick, flat washer | 170 engine, Motorcraft 38A, 42A, 45A, 55A alternator |
| 352981-S | 1965-1967 | Washer - Alternator Adjustment Arm | 3/8" bolt size, 13/32" I.D., 1" O.D., 1/8" thick, flat washer | 240 engine, Motorcraft 38A, 42A, 45A, 52A, 55A alternator |
| 354054-S8 | 1961-1967 | Washer - Folding Swivel Passenger Seat Latch Plate to Engine Cover (Latch Plate) | 5/16" bolt size, 11/32" I.D., 1-1/16" O.D., 3/32" thick, flat washer | |
| 354398-S | 1961-1967 | Washer - Countershaft Gear Pilot Bearing Roller | 7/8" bolt size, 29/32"(0.908" - 0.918") I.D., 1-7/64" O.D., 3/64" thick, flat washer | |
| 354610-S4 | 1965-1967 | Washer - Distributor Diaphragm Assembly Vacuum Calibration | 1/4" bolt, 1/4" I.D., 9/16" O.D., 5/64"(0.78") thick, flat washer | (1965-1967) 170 engine with C6DF-A, C6DF-D, C7DF-A dual-advance distributor (1966-1967) 240 engine with C6TF-AY, C6UF-H dual-advance distributor |
| 354655-S | 1961-1962 | Washer - transmission ?? | 3/4" bolt, 49/64" I.D., 31/32" O.D., 3/64" thick, flat washer | |
| 354655-S | 1963-1964 | Washer - Countershaft Gear Pilot Bearing | 3/4" bolt size, 49/64" I.D., 31/32" O.D., 3/64" thick, flat washer | |
| 354861-S | 1963-1966 | Washer - Windshield Wiper Motor Output Gear and Shaft | 3/8" bolt size, 13/32" I.D., 9/16" O.D., 1/16" thick, flat washer | Ford single-speed wiper motor |
| 356321-S8 | 1966-1967 | Washer - Exhaust Air Supply Pump Belt Adjustment Arm to Engine | 3/8" bolt size, 13/32" I.D., 7/8" O.D., 5/32" thick, flat washer | 240 engine with Thermactor emissions |
| 356403-S8 | 1961-1964 | Washer - Front Seat Track Assembly | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356403-S8 | 1961-1967 | Washer - Driver Seat L.H. Support to Floor | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356403-S8 | 1961-1967 | Washer - Driver Seat R.H. Track Support to Floor | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356403-S8 | 1961-1967 | Washer- Passenger Seat - Front Support Assembly to Floor - L.H. | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356403-S8 | 1964-1967 | Washer - Parking Pawl Toggle Operating Lever | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356403-S8 | 1965-1967 | Washer - Front Driver Seat Suspension Torsion Bar | 5/16" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | |
| 356414-S | 1961-1967 | Washer - Sector Shaft Cover | 5/16" bolt size, 21/64" I.D., 9/16" O.D., 1/16" thick, flat washer | |
| 356425-S | 1961-1967 | Washer - Front Door Ventilating Window Pivot | 3/8" bolt size, 3/8" I.D., 49/64" O.D., 1/64" thick, flat washer | |
| 356488-S | 1961-1967 | Washer - Clutch Release Equalizer Shaft ??? | 11/16" bolt size, 21/32" I.D., 1-1/8" O.D., 1/16" thick, flat washer | |
| 356504-S | 1963-1967 | Washer - Universal Joint - Axle End Flange | 3/4" bolt, 25/32" I.D., 1-1/2" O.D., 1/8" thick, flat washer | both rear axles? |
| 357577-S8 | 1965 | Washer - Section No. 1 Roof Trim Panel | 3/16" bolt size, 7/32" I.D., 1-5/64" O.D., 1/16" thick, flat washer | 89 van/bus |
| 358605-S | 1963-1967 | Washer - Air Conditioner Compressor Clutch & Pulley | 5/16" bolt size, 21/64" I.D., 15/16" O.D., 3/16" thick, flat washer | |
| 358662-S | 1961-1962 | Nut - Field Terminal ?? | 1/4" bolt, 1/4" I.D., 1/2" O.D., 1/64" thick, flat washer | use with starter C0DF 11001-D |
| 358662-S | 1963-1966 | Washer - Windshield Wiper Gear and Pinion | 1/4" bolt, 1/4" I.D., 1/2" O.D., 1/64" thick, flat washer | Ford single-speed wiper motor |
| 358662-S | 1964-1967 | Washer - Windshield Wiper Gear and Pinion | 1/4" bolt, 1/4" I.D., 1/2" O.D., 1/64" thick, flat washer | Ford two-speed wiper motor |
| 358662-S | 1964-1967 | Washer - Parking Pawl Toggle Operating Lever and Manual Control Valve Detent Lever | 1/4" bolt, 1/4" I.D., 1/2" O.D., 1/64" thick, flat washer | |
| 358979-S | 1961-1967 | Felt Washer - Clutch Release Equalizer Shaft Ball - Inner & Clutch Release Equalizer to Frame Bracket Assembly - Bracket to Underbody | 11/16" bolt, 23/32" (0.72" - 0.74") I.D., 1-3/8" O.D., 9/32" thick, felt flat washer | |
| 359840-S8 | 1962-1967 | Washer - Clutch Pedal to Underbody Pivot | 5/16" bolt size, 21/64" I.D., 1-1/8" O.D., 3/32" thick, flat washer | |
| 370347-S | 1961-1967 | Washer - Valve Rocker Arm Shaft Support to Cylinder Head | 3/8" bolt size, 13/32" I.D., 45/64" O.D., 5/32" thick, flat washer | 144, 170 engine |
| 370444-S | 1966-1967 | Washer - Exhaust Air Supply Pump Belt Adjustment Arm to Pump | 3/8" bolt size, 3/8" I.D., 3/4" O.D., 1/16" thick, flat washer | 240 engine with Thermactor emissions |
| 371030-S8B | 1963-1967 | Washer - Differential Gear Case | 7/16" bolt, 29/64" I.D., 29/32" O.D., 1/16" thick, flat washer | WCR 9" rear axle, Equa-Lock differential |
| 371617-S | 1961-1967 | Washer - Front Door Vent Window Weatherstrip Retainer | 3/8" bolt size, 25/64" I.D., 39/64" O.D., 1/32" thick, flat washer | |
| 371617-S | 1964-1967 | Washer - Front Door Vent Window Frame | 3/8" bolt size, 25/64" I.D., 39/64" O.D., 1/32" thick, flat washer | |
| 371738-S | 1961-1962 | Washer - Clutch Pedal to Underbody Pivot | 5/16" bolt size ??? | |
| 372239-S | 1961-1967 | Washer - Primary Terminal Wire Assembly | No. 6 bolt, 5/32" I.D., 5/16" O.D., 1/64" thick, flat washer | with Loadomatic distributor |
| 372396-S8 | 1965-1967 | Washer - Distributor Breaker Lower Plate to Upper Plate | 3/16" bolt size, 3/16" I.D., 7/16" O.D., 1/32" thick, flat washer | (1965-1967) 170 engine with C6DF-A, C6DF-D, C7DF-A dual-advance distributor (1966-1967) 240 engine with dual-advance distributor and Thermactor emissions: C6TF 12127-AY, C6UF 12127-H distributor |
| 372583-S | 1961-1967 | Retainer - Drive Stop Ring | 7/16" bolt size, 15/32" I.D., 21/32" O.D., 3/64" thick, flat washer | 4.5" Starter. (Use 11223 if normal 4" starter) |
| 372583-S | 1964-1967 | Washer - Brake Shoe Adjusting Screw | 7/16" bolt size, 15/32" (0.474") I.D., 21/32" O.D., 3/64" thick, flat washer | |
| 372757-S | 1961-1967 | Washer - Pulley to Crankshaft | 9/16" bolt size, 37/64" I.D., 1-49/64" O.D., 21/64" thick, flat washer | 144, 170 engine |
| 373820-S | 1963-1967 | Washer - Five Lower Carrier to Housing Bolt | 3/8" bolt size, 13/32" I.D., 19/32" O.D., 3/64" thick, flat washer | WCR, WDF 9" rear axle |
| 374370-S | 1963-1964 | Washer - Heater Fesh Air Inlet Control | 1/4" bolt size, 19/64" I.D., 15/32" O.D., 1/32" thick, flat washer | |
| 374576-S36 | 1965-1967 | Washer - Printed Circuit Board | No. 10 bolt size, 15/64" I.D., 3/4" O.D., 1/16" thick, flat washer | Motorcraft 38A, 42A, 45A, 52A, 55A alternator |
| 375482-S8B | 1965-1967 | Washer - Distributor Diaphragm Assembly Vacuum Calibration | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.009" thick, flat washer | (1965-1967) 170 engine with C6DF-A, C6DF-D, C7DF-A dual-advance distributor (1966-1967) 240 engine with dual-advance distributor and Thermactor emissions: C6TF 12127-AY, C6UF 12127-H distributor |
| 375483-S8B | 1965-1967 | Washer - Distributor Diaphragm Assembly Vacuum Calibration | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.021" thick, flat washer | (1965-1967) 170 engine with C6DF-A, C6DF-D, C7DF-A dual-advance distributor (1966-1967) 240 engine with dual-advance distributor and Thermactor emissions: C6TF 12127-AY, C6UF 12127-H distributor |
| 375484-S8B | 1965-1967 | Washer - Distributor Diaphragm Assembly Vacuum Calibration | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.041" thick, flat washer | (1965-1967) 170 engine with C6DF-A, C6DF-D, C7DF-A dual-advance distributor (1966-1967) 240 engine with dual-advance distributor and Thermactor emissions: C6TF 12127-AY, C6UF 12127-H distributor |
| 375484-S8B | 1965-1967 | Washer - Accelerator Shaft to Bellcrank Rod | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.041" thick, flat washer | 240 engine |
| 375484-S8B | 1965-1967 | Washer - Transmission Control Shaft to Transmission Rod | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.041" thick, flat washer | 240 engine with automatic transmission |
| 375484-S8B | 1965-1967 | Washer - Exhaust Thermostat Control Valve | 1/4" bolt size, 1/4" I.D., 35/64" O.D., 0.041" thick, flat washer | 240 engine |
| 379039-S | 1966-1967 | Washer - Driven Gear Thrust Washer | 5/16" bolt size, 5/16" I.D., 5/8" O.D., 3/64" thick, flat washer | (1966-1967) 240 engine with dual-advance distributor and Thermactor emissions: C6TF 12127-AY, C6UF 12127-H distributor |
| 382580-S100 | 1964 | Washer - Front Motor Mount Support Bracket to Insulator | 7/16" bolt size, 15/32" I.D., 1" O.D., 11/64" thick, flat washer | 144, 170 engine with automatic transmission |
Thanks for the positive comments that have been left on this site. It is still a work in progress.