Thanks for the positive comments that have been left on this site. It is still a work in progress.
| Section | Year(s) | Part Number | Part Number | TEMP check part | TEMP check hardware | TEMP check instruction | Part Name | Description | Application | Identification | Color |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 41 | 1961-1967 | 375748-S100 (BB-807-EA) | 375748-S100 | check= 0 | 0 | Bolt - Rear Wheel Bearing, Outer Retainer | 3/8"-24, 1-3/16" long, 15/16" thread length, special bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 305086-S | 305086-S | check= 0 | 0 | Pin - Differential Pinion Shaft | 3/16" diameter, 1-1/8" long, roll pin | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | C0DW 4215-C | C0DW 4215-C | 0 | check= 9 | 0 | Pinion - Rear Axle Differential | ??? | |||
| 41 | 1961-1967 | 351521-S (XX-237) | 351521-S | check= 0 | 0 | Washer - Rear Axle U-joint Flange | 3/4" bolt size, 25/32" I.D., 1-3/16" O.D., 5/32" thick, flat washer | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | C0DZ 4067-A | C0DZ 4067-A | 0 | check= 9 | 0 | Adjuster Nut - Differential Bearing | ??? | WCC | ||
| 41 | 1961-1967 | C0DW 4067-B | C0DW 4067-B | 0 | check= 9 | 0 | Adjuster Nut - Differential Bearing | ??? | WCC | ||
| 41 | 1961 | 43006-S | 43006-S | check= 0 | 0 | Bolt - Bearing Cap | 3/8"-16, 2" long, self-locking bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 20522-S8 (B-89) | 20522-S8 | check= 0 | 0 | Bolt - Bearing Cap | 3/8"-16, 2" long, hexagon head, full diameter body, bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1963 | 374055-S | 374055-S | check= 0 | 0 | Bolt - Brake Carrier - Rear Brake Backing Plate to Axle | 3/8"-24, 1-3/16" long, ?? Bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 43005-S | 43005-S | check= 0 | 0 | Bolt - Differential Gear Case Assembly | 3/8"-16, 2" long, hex-head, self-locking bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 20348-S2 (B-77) | 20348-S2 | check= 0 | 0 | Bolt - Housing Cover | 3/8"-16, 3/4" long, hexagon-head, full-diameter-body bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 350110-S | 350110-S | check= 0 | 0 | Bolt - Pinion Shaft | 3/16"-??, 1-1/2" long bolt/pin | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 20553-S | 20553-S | check= 0 | 0 | Bolt - Rear Shock Absorber, Lower Mounting | 1/2"-20, ??" long, bolt | 2300 lb rear axle | |||
| 41 | 1961-1967 | 20348-S2 (B-77) | 20348-S2 | check= 0 | 0 | Bolt - Rear Wheel - Outer Bearing Retainer | 3/8"-16, 3/4" long, hexagon head, full diameter body, bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | C1DW 4204-B | C1DW 4204-B | 0 | check= 9 | 0 | Case Assembly - Differential Gear | ??? | except 4.57:1 ratio | ||
| 41 | 1964-1965 | C2AZ 4204-B | C2AZ 4204-B | 0 | check= 9 | 0 | Case Assembly - Differential Gear | includes (2) C2OW 4228-A Washers | 4.57:1 ratio From Ser. 460,001 to 660,001 | ||
| 41 | 1965-1967 | C2AZ 4204-H | C2AZ 4204-H | 0 | check= 9 | 0 | Case Assembly - Differential Gear | includes (2) C2OW 4228-A Washers | 4.57:1 ratio From Ser. 660,001 | ||
| 41 | 1961-1967 | C1UW 4221-A | C1UW 4221-A | 0 | check= 9 | 0 | Cone & Roller Assembly - Differential Bearing | 1-1/2" I.D. (small size) | LM29749 | ||
| 41 | 1961-1967 | C0DW 4621-A | C0DW 4621-A | 0 | check= 9 | 0 | Cone & Roller Assembly - Driving Pinion Bearing - Front | ??? | M86649 | ||
| 41 | 1961-1967 | C0DW 4630-A | C0DW 4630-A | 0 | check= 9 | 0 | Cone & Roller Assembly - Driving Pinion Bearing - Rear | ??? | 7" ring gear | HM88649 | |
| 41 | 1961-1967 | C1DZ 4630-A | C1DZ 4630-A | 0 | check= 9 | 0 | Cone & Roller Assembly - Driving Pinion Bearing - Rear | ??? | 7-1/4" ring gear | HM89446 | |
| 41 | 1961-1967 | C1DW 4033-A | C1DW 4033-A | 0 | check= 9 | 0 | Cover - Rear Axle Housing | ??? | WCC | ||
| 41 | 1961-1967 | C1UW 4222-A | C1UW 4222-A | 0 | check= 9 | 0 | Cup - Differential Bearing | 2-9/16" O.D. (small size) | LM29710 (1961-1962) LM29749 | ||
| 41 | 1961-1967 | C0DW 4616-A | C0DW 4616-A | 0 | check= 9 | 0 | Cup - Driving Pinion Bearing - Front | ??? | fpr 7" ring gear?? | M86610 | |
| 41 | 1961-1967 | TBAA 4616-A | TBAA 4616-A | 0 | check= 9 | 0 | Cup - Driving Pinion Bearing - Rear | ??? | 7-1/4" ring gear | HM89410 | |
| 41 | 1961-1967 | C0DW 4628-A | C0DW 4628-A | 0 | check= 9 | 0 | Cup - Driving Pinion Bearing - Rear | ??? | 7" ring gear | HM88610 | |
| 41 | 1961-1967 | ???? 4859-? | ???? 4859-? | 0 | check= 9 | 0 | Deflector - U-Joint Flange Oil Seal Dust | ??? | |||
| 41 | 1961-1967 | C0DZ 4211-A | C0DZ 4211-A | 0 | check= 9 | 0 | Differential Pinion Shaft Kit - Rear Axle | includes:
| WCC conventional differential | ||
| 41 | 1961-1967 | C1DZ 4211-A | C1DZ 4211-A | 0 | check= 9 | 0 | Differential Pinion Shaft Kit - Rear Axle | includes:
| WCC rear axle with 4-pinion differential | ||
| 41 | 1961-1967 | C0DZ 4215-C | C0DZ 4215-C | 0 | check= 9 | 0 | Differential Shaft Pinion Kit - Rear Axle | includes:
| |||
| 41 | 1961-1967 | C2DZ 4851-A | C2DZ 4851-A | 0 | check= 9 | 0 | Flange - Universal Joint - Axle End | includes 4859 | |||
| 41 | 1961-1962 | C1UW 4851-A | C1UW 4851-A | 0 | check= 9 | 0 | Flange - Universal Joint - Axle End | A=2.87", B=1.12", C=2.68", D=1.683", F=1", G=2.222", H=1.362", J=1.002". K=0.9358", M=23 splines | |||
| 41 | 1961-1967 | C1DZ 4036-A | C1DZ 4036-A | 0 | check= 9 | 0 | Gasket - Cover to Housing | ??? | WCC | ||
| 41 | 1961-1962 | C1DW 4036-A | C1DW 4036-A | 0 | check= 9 | 0 | Gasket - Cover to Housing | ??? | WCC | ||
| 41 | 1961-1967 | C1DZ 4209-Z | C1DZ 4209-Z | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle | ring C1DW 4210-C pinion C1DW 4610-F | |
| 41 | 1961-1964 | C1DZ 4209-U | C1DZ 4209-U | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7" ring gear, 3.50 ratio, 35&10 teeth | 144 engine, WCC-A axle | ring C0DW 4210-T pinion C1DW 4610-K | |
| 41 | 1961-1967 | C1DZ 4209-R | C1DZ 4209-R | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle | ||
| 41 | 1961-1964 | C1UZ 4209-E | C1UZ 4209-E | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7" ring gear, 4.00 ratio, 36&9 teeth | 144 engine, WCC-C axle | ring C1UW 4210-A pinion C1UW 4610-B | |
| 41 | 1964 | C1DZ 4209-AC | C1DZ 4209-AC | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7" ring gear, 3.50 ratio, 35&10 teeth | 144 engine, WCC axle | ||
| 41 | 1961-1964 | C1UZ 4209-D | C1UZ 4209-D | 0 | check= 9 | 0 | Gear & Pinion Kit w/Shims | 7" ring gear, 4.00 ratio, 36&9 teeth | 144 engine, WCC axle | ||
| 41 | 1961-1967 | C1DW 4236-A | C1DW 4236-A | 0 | check= 9 | 0 | Gear - Differential Side | ??? | |||
| 41 | 1962-1967 | C2TZ 4209-G | C2TZ 4209-G | 0 | check= 9 | 0 | Gear and Pinion - Driving - Matched Set | 7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle | ring C2UW 4210-A pinion C2UW 4610-A | |
| 41 | 1962-1967 | C1DZ 4209-G | C1DZ 4209-G | 0 | check= 9 | 0 | Gear and Pinion - Driving - Matched Set Kit - Differential Gear, Driving Pinion and Shims | 7-1/4" ring gear, 3.50 ratio, 35&10 teeth | 170 engine WCC axle | Ring "C1DW 4210-C" Pinion "C1DW 4610-F" | |
| 41 | 1961 | C1DZ 4209-G | C1DZ 4209-G | 0 | check= 9 | 0 | Gear and Pinion - Driving - Matched Set Kit - Differential Gear, Driving Pinion and Shims | 7" ring gear, 4.00 ratio | 144 engine, WCC axle | ||
| 41 | 1962-1966 | C2TZ 4209-A | C2TZ 4209-A | 0 | check= 9 | 0 | Gear and Pinion - Driving - Matched Set Kit, Differential Gear, Driving Pinion and Shims | 7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle | ||
| 41 | 1962-1967 | C2TZ 4209-D | C2TZ 4209-D | 0 | check= 9 | 0 | Gear and Pinion - Driving - Matched Set Kit, Differential Gear, Driving Pinion and Shims | 7-1/4" ring gear, 4.00 ratio, 36&9 teeth | 170 engine WCC axle | Ring "C2UW 4210-A" Pinion "C2UW 4610-A" | |
| 41 | 1961-1967 | C1DZ 4236-A | C1DZ 4236-A | 0 | check= 9 | 0 | Gear Kit - Differential Side | includes:
| |||
| 41 | 1966-1967 | C3UZ 4010-G | C3UZ 4010-G | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear from Ser. 774,001 | WCC | |
| 41 | 1963-1966 | C3UZ 4010-E | C3UZ 4010-E | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear from Ser. 380,001 to 774,001 | WCC | |
| 41 | 1963-1965 | C3UZ 4010-C | C3UZ 4010-C | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear, from Ser. 380,001 | WCC | |
| 41 | 1961-1962 | C1TZ 4010-B | C1TZ 4010-B | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 170 engine - 7-1/4" ring gear | WCC | |
| 41 | 1961-1963 | C2UZ 4010-A | C2UZ 4010-A | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear, before Ser. 380,001 | WCC | |
| 41 | 1961-1962 | C1TZ 4010-A | C1TZ 4010-A | 0 | check= 9 | 0 | Housing Assembly - Rear Axle | WCC 7-1/4" Integral-Carrier Rear Axle | 144 engine, 7" ring gear | WCC | |
| 41 | 1961-1964 | C1UZ 4209-B | C1UZ 4209-B | 0 | check= 9 | 0 | Kit - Differential Gear and Driving Pinion - Matched Set | 7" ring gear, 4.00 ratio, 36&9 teeth includes shims | WCC axle | ring C1UW 4210-A pinion C1UW 4610-B | |
| 41 | 1961-1964 | C1DZ 4209-M | C1DZ 4209-M | 0 | check= 9 | 0 | Kit - Differential Gear and Driving Pinion - Matched Set | 7" ring gear, 3.50 ratio, 35&10 teeth includes shims | 144 engine, WCC axle | Ring "C0DW 4210-T" Pinion "C1DW 4610-K" | |
| 41 | 1961-1967 | D0ZZ 4143-A | D0ZZ 4143-A | 0 | check= 9 | 0 | Lock - Differential Adjuster | ??? | WCC | ||
| 41 | 1961-1967 | C0DW 4143-B | C0DW 4143-B | 0 | check= 9 | 0 | Lock - Differential Adjuster | ??? | WCC | ||
| 41 | 1961-1967 | 34807-S7-8 (X-66) | 34807-S7-8 | check= 0 | 0 | Lockwasher - Bearing Cap (Retainer) | 3/8" bolt size, 11/16" O.D., 3/32" thick, medium lock washer | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 34806-S7 (X-64)(X-65) | 34806-S7 | check= 0 | 0 | Lockwasher - Differential Adjuster Lock | 5/16" bolt size, 19/32" O.D., 5/64" thick, medium lock washer | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 34807-S7-8 (X-66) | 34807-S7-8 | check= 0 | 0 | Lockwasher - Housing Cover | 3/8" bolt size, 11/16" O.D., 3/32" thick, medium lock washer | WCC 7-1/4" rear axle | |||
| 41 | 1961-1962 | 34807-S | 34807-S | check= 0 | 0 | Lockwasher - Rear Wheel - Outer Bearing Retainer | 3/8" bolt size, 11/16" O.D., 3/32" thick, medium lock washer | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 353909-S8 (NN-109) | 353909-S8 | check= 0 | 0 | Pin - Pinion Shaft | 3/16" diameter, 1-1/2" long, spring pin | WCC 7-1/4" rear axle | |||
| 41 | 1961-1962 | C1AW 4215-C | C1AW 4215-C | 0 | check= 9 | 0 | Pinion - 7-1/4" Rear Axle Differential | ??? | |||
| 41 | 1961-1967 | 379166-S (PP-54-N) | 379166-S | check= 0 | 0 | Plug - Rear Axle Filler | 7/8"-18, 13/32" thread length, hexagon-head, threaded plug | WCC 7-1/4" rear axle | |||
| 41 | 1962-1967 | ???? 4A050-? | ???? 4A050-? | 0 | check= 10 | 0 | Scoop - Differential Carrier Oil | ??? | |||
| 41 | 1961-1967 | 350211-S (BB-413) | 350211-S | check= 0 | 0 | Screw - Differential Adjuster Lock | 5/16"-18, 7/16" long, 11/32" thread length, self-locking, hexagon-head, bolt | WCC 7-1/4" rear axle | |||
| 41 | 1961-1967 | 372768-S (BB-437) | 372768-S | check= 0 | 0 | Screw - Differential Gear to Case Assembly Locking | 3/8"-24, 3/4" long, 1/2" thread length, self-locking, slotted-hexagon-head bolt | WCC 7-1/4" rear axle | |||
| 41 | 1967 | C1UZ 4676-C | C1UZ 4676-C | 0 | check= 9 | 0 | Seal Assembly - Drive Pinion Oil/Grease | 2-5/8"O.D., 0.455" thick, to seal 1-21/32" shaft | From Ser. A84,001 | ||
| 41 | 1961-1967 | C1UZ 4676-B | C1UZ 4676-B | 0 | check= 9 | 0 | Seal Assembly - Drive Pinion Oil/Grease | 1-5/8" I.D., 2-5/8"O.D., 1/2" thick | Before Ser. A84,001 | ||
| 41 | 1961-1962 | C1UW 4676-B | C1UW 4676-B | 0 | check= 9 | 0 | Seal Assembly - Drive Pinion Oil/Grease | 1-5/8" I.D., 2-5/8"O.D., 1/2" thick | |||
| 41 | 1961-1967 | C1UW 1177-A | C1UW 1177-A | 0 | check= 9 | 0 | Seal Assembly - Rear Wheel Bearing Oil - Inner | 1-3/8" I.D., 2-3/32" O.D. | 7-1/4" rear axle | ||
| 41 | 1961-1967 | C1DW 4420-A | C1DW 4420-A | 0 | check= 9 | 0 | Seat - Differential Pinion Short Shaft | ??? | |||
| 41 | 1961-1967 | C1DW 4419-A | C1DW 4419-A | 0 | check= 9 | 0 | Shaft - Differential Pinion - Short | ??? | |||
| 41 | 1967 | C1UZ 4235-B | C1UZ 4235-B | 0 | check= 9 | 0 | Shaft and Bearing - L.H. Axle | ??? | |||
| 41 | 1961-1966 | C1UZ 4235-A | C1UZ 4235-A | 0 | check= 9 | 0 | Shaft and Bearing - L.H. Axle | A= 28-35/64" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes | |||
| 41 | 1961-1962 | C1UW 4235-A | C1UW 4235-A | 0 | check= 9 | 0 | Shaft and Bearing - L.H. Axle | ??? | |||
| 41 | 1967 | C1TZ 4234-B | C1TZ 4234-B | 0 | check= 9 | 0 | Shaft and Bearing - L.H. Axle | A= 28-35/64" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes | |||
| 41 | 1961-1966 | C1UW 4234-A | C1UW 4234-A | 0 | check= 9 | 0 | Shaft and Bearing - R.H. Axle | A= 32-1/16" long B= 1-1/16" diameter C= 6-1/8" hub width D= 4-1/2" lug circle diameter 24 splines 5 stud holes | |||
| 41 | 1967 | C1TZ 4234-A | C1TZ 4234-A | 0 | check= 9 | 0 | Shaft and Bearing - R.H. Axle | A=32-1/16" long B=1-1/16" diameter C=6-1/8" hub width D=4-1/2" lug circle diameter 24 splines 5 lug holes | |||
| 41 | 1961-1967 | C0DW 4663 | C0DW 4663 | 0 | check= | 0 | Shim - Driving Pinion Bearing | ??? | |||
| 41 | 1961-1962 | C1DW 4662-C | C1DW 4662-C | 0 | check= 9 | 0 | Spacer - Driving Pinion Bearing | ??? | |||
| 41 | 1961-1967 | C3DZ 4662-B | C3DZ 4662-B | 0 | check= 9 | 0 | Spacer - Driving Pinion Bearing | ??? | 7-1/4" ring gear | ||
| 41 | 1961-1967 | C3DZ 4662-A | C3DZ 4662-A | 0 | check= 9 | 0 | Spacer - Driving Pinion Bearing | ??? | 7" ring gear | ||
| 41 | 1961-1967 | C0DW 4211-C | C0DW 4211-C | 0 | check= 9 | 0 | Spider Assembly - Differential Pinion Shaft | ??? | WCC conventional differential | ||
| 41 | 1961-1967 | C0DW 4228-A | C0DW 4228-A | 0 | check= 9 | 0 | Washer - Differential Side Gear Thrust | 1.39" I.D., 2.24"O.D., 0.03" thick washer | |||
| 41 | 1961-1967 | C0DW 4230-C | C0DW 4230-C | 0 | check= 9 | 0 | Washer - Pinion Shaft Thrust | 0.655"I.D., 1.28"O.D., black washer | black |
Thanks for the positive comments that have been left on this site. It is still a work in progress.